30.530.5mm GEPRC TAKER H743 BT 3-6S 65A Stack Flight Controller 5V 12V BEC Output 32Bit 4in1 ESC for RC FPV Racing Drones

Description:

The TAKER H743 BT 32Bit 65A STACK is the latest stack system developed by the GEPRC team. It features a high-performance STM32H743VIH6 chip with a Cortex-M7 core running at up to 480MHz, handling both racing and freestyle flights with ease. Its dual gyroscope setup, using MPU6000 and ICM42688-P, ensures precise control. With integrated Bluetooth for wireless parameter adjustments and a built-in 512MB black box, it’s well-equipped. It also offers eight motor output ports and is compatible with X8 models.

Compatible with Betaflight, INAV, and Ardupilot, it ensures flexibility. The dual independent 5V@3A + 12V@2.5A BEC ensures stable charging and motor voltage options. Features include seven UART ports, an integrated barometer, and plug-and-play functionality. With the TAKER H65_8S_32Bit 65A 4IN1 ESC, it delivers an exceptionally smooth flight experience.

 

Feature:

1. Adopts the high-performance STM32H743 as the main controller

2. Equipped with MPU6000 and 42688-P dual gyroscopes

3. 512MB high-capacity black box storage

4. Bluetooth parameter tuning

5. Plug-and-play, no soldering required

6. Integrated barometer

7. Features 7 UART ports

8. Independent BEC with 12V@2.5A and 5V@3A outputs

9. Supports multiple firmware options

10. Equipped with the TAKER H65_8S_32Bit 65A 4IN1 ESC for a smooth flight experience

 

Specification:

Brand: GEPRC

Model: TAKER H743 BT 32Bit 65A STACK

Model	Parameter
TAKER H743 BT Flight Controller	FC Model: TAKER H743 BT Flight Controller MCU: STM32H743 IMU: MPU6000 + ICM42688-P(dual gyro) Air Unit Connection: direct plug for DJI Air Unit Black Box: 512M onboard Bluetooth: Supported Barometer: Supported USB Interface: Type-C OSD: BetaFlight OSD w/ AT7456E chip BEC Output: 5V@3A,12V@2.5A dual BEC Target: GEPRC_TAKER_H743 Dimension: 38.5×38.5mm, mounting hole size 30.5×30.5mm Input Voltage: 3-6S LiPo UART Ports: 7 groups (UART3 fixed for Bluetooth) Power Filtering: Integrated LC filter Weight: 8.4g
TAKER H65_8S_32Bit 65A 4IN1 ESC	ESC Model: TAKER H65_8S_32Bit 65A 4IN1 ESC Input Voltage: 3-8S Lipo(STACK only supports 3-6S) Ammeter: Support Continue Current: 65A Burst Current: 70A（5 seconds） Support Protocol: Dshot 150/300/600 Size: 42×45.7mm,hole30.5×30.5mm,φ4mm hole becomes φ3mm after using the silicone shock-absorbing ring. Weight: 15.8g Target: GEPRC_F4_4in1 Note: pre-installed with BL32 test firmware, extensively tested for safety and reliability (AM32 is also supported, customer flashing is required.target:AM32_AT32DEV_F421)

 

Package Included:

1 x TAKER H743 BT Flight Controller

1 x TAKER H65_8S_32Bit 65A 4IN1 ESC

1 x Electrolytic capacitor(50V 1000uF)

1 x DJI connection cable(SH1.0 6pin 100mm)

1 x FC adapter cable(SH1.0 8pin 30mm)

1 x Receiver silicone cable(SH1.0 4pin 150mm)

1 x Camera connection cable(SH1.0-SH1.25 3pin 60mm)

1 x VTX connection cable(SH1.0 4pin-6pin 100mm)

1 x XT60 power cable(12AWG 110mm)

4 x M3*30 screws

4 x M3*25 screws

8 x Nylon nuts(M3)

12 x Silicone anti-shake pads(M3)