25.5×25.5mm Speedybee F405 V2 35A AIO F405 Flight Controller & 3-6S BLHeli_S 4in1 ESC for FPV Racing Drone DIY Parts
1 in stock
- SKU : 2049161
- Condition : New
- Brand : Speedybee
- Processing Time : Ships Within 24-48 Hours
- Return Policy : 30-day refund or replacement
$79.99 $99.99
Specification:
Brand: Speedybee
Product Name: F405 V2 35A AIO Standard Version
|
Item |
Parameter |
|
Flight Controller |
MCU: STM32F405 IMU (Gyro): ICM-42688P USB Port Type: Type-C Barometer: SPA06-003 OSD chip: Supported BLE Bluetooth: Supported Wireless FC Firmware Update: Supported DJI Air Unit Connection Method: Supports both 6-pin direct insertion and soldering Blackbox: 8MB Betaflight CC Pad: Supported Power Input: 3S – 6S LiPo 4V5 Output: 1A 5V BEC Output: 1.5A 9V BEC Output: 1.5A Motor Pads: M1-M4 UART: 4 full-function serial ports (UART3, UART4, UART5, UART6+SBUS[R2]) ESC Telemetry: None I2C: Supported LED Pad: Supported Buzzer Pad: Supported BOOT Button: Supported RSSI Pad: None SmartPort: Not supported Supported FC Firmware: Betaflight Firmware Target Name: SPEEDYBEEF405AIOV2 Mounting: 25.5 x 25.5mm, 2mm hole diameter Dimensions: 33.0mm(L) x 33.0mm(W) x 7.0mm(H) Weight: 8.9g |
|
ESC |
Input Voltage: 3-6S LiPo Continuous Current: 35A (Single channel) / 140A (4 channels combined) Burst Current: 40A (Single channel) / 160A (4 channels combined) ESC Protocol: Supports DSHOT600/300; other protocols may cause severe errors, please use with caution. Output Voltage: VBAT battery voltage (used to power the flight controller) Current Sensor: Supported (Scale=88, Offset=0) ESC Firmware: Bluejay JH-40 48KHz |
Package Included:
1 x Speedybee F405 V2 35A AIO Standard Version
1 x Soldering Practice Board
4 x M2*7.7mm Silicone Dampening Sleeves
4 x M2*8.4mm Silicone Dampening Sleeves
1 x Cable for DJI Air Unit (SH1.0 6pin*80mm)
1 x XT30 Power Cable (Length: 7cm)
5 x M2 Silicone Dampening Ring
5 x M2 Nylon Hex Nut
1 x BEC
1 x Type-C Extension Module
1 x 4-pin * 80mm Cable for Type-C Extension Module
2 x Transparent Heat Shrink Tube for External BEC & Type-C Extension Module
1 x 80mm Cable for Meteor LED Strip & BEC
1 x User Manual
1 x Power Expansion Board
4 x M2*20mm Screws for F405 AIO & VTX Installation
4 x M2*12mm Screws for F405 AIO Installation
1 x 35V 470uF Electrolytic Capacitor
2 x Capacitor Heat Shrink Tube
Based on 0 reviews
Be the first to review “25.5×25.5mm Speedybee F405 V2 35A AIO F405 Flight Controller & 3-6S BLHeli_S 4in1 ESC for FPV Racing Drone DIY Parts”
You must be logged in to post a review.
There are no reviews yet.