Description:
As the industry’s first 1S AIO (All-in-One) flight controller specifically optimized for the DJI O4 and O4 Pro high-definition digital systems, the GOKU F405 HD sets a new standard for ultralight FPV performance. Built on a powerful STM32F405 MCU and a precision ICM42688P IMU, it provides the processing headroom and gyro stability required for cinematic 1S builds.
Unlike standard 5A boards, this AIO integrates a robust 12A continuous (15A peak) ESC and dual high-efficiency BECs (9V/2A and 5V/3A), ensuring your O4 Air Unit receives consistent power even during aggressive maneuvers. Whether you are building a 40mm Tiny Whoop or a 3-inch long-range toothpick, its plug-and-play design and TCXO ELRS 2.4G receiver offer a seamless, interference-free connection for the most demanding pilots.
Highlights:
* Wide Compatibility: Works with 40mm-3inch propeller frames and 0802-1303 micro motors.
* Dual BEC : Built-in 9V/5V dual BEC, providing independent and stable voltage.
* Powerful ESCs: 12A high-spec ESCs optimized for 1S systems, delivering smooth power and fast respons.
* Serial ELRS: Integrated serial ELRS 2.4GHz receiver (built-in TCXO crystal oscillator).
* Solder-Free Assembly: Solder-free motor socket design simplifies the assembly process.
* Convenient Interface: Equipped with USB-C port.
* Powerful MCU : STM32F405BGA aerospace-grade MCU (up to 68% faster processing vs. traditional F411 and 20% vs. G437).
* Plug and Pay: Supports direct plug-in of O4/O4PRO , no soldering required, stable signal.
* External Black Box or GPS: Supports direact plug in of GOKU GM10 Nano V3 GPS or Flywoo 0.4g OpenLager Nano module with 512MB capacity.
Specification:
Brand: Flywoo
Model: GOKU
|
Product Name |
GOKU F405 HD 1S 12A AIO |
|
MCU |
STM32F405BGA |
|
IMU |
ICM42688P |
|
Barometer |
SPL06 |
|
Black Box |
No (Supports External Black Box ) |
|
OSD Support |
No |
|
UART |
UART2,UART3(For ELRS),UART4,UART5(SBUS),UART6 |
|
Protocols |
CRSF, SBUS, iBus, Spektrum |
|
BEC |
5V3A 9V2A MAX |
|
RX |
Flywoo TCXO EL24E 2400 RX 3.x.x |
|
BF Firmware |
FLYWOOF405S_AIO |
|
INAV Firmware |
FLYWOOF405HD |
|
Dimensions |
30.5*30.5mm*10mm |
|
Mounting Holes |
25.5*25.5mm |
|
Weight |
3.4g |
|
Product Name |
Onboard 4in1 ESC |
|
Power input |
1S Only |
|
Current |
12A continuous, 15A peak |
|
ESC firmware |
O_H_5_48KHz_V0.19.hex Bluejay firmware |
|
Digital signal protocol |
DShot300, DShot600 |
|
Motor Connector |
JST1.25 |
|
Battery connector |
A30 |
|
Compatibility Category |
Compatible Hardware / Protocols |
|
Digital VTX Systems |
DJI O4, O4 Pro, DJI O3 Air Unit, Walksnail Avatar, HDZero |
|
Radio Protocols |
Integrated TCXO ELRS 2.4G (UART3), SBUS (UART5), CRSF, iBus |
|
Frame Sizes |











There are no reviews yet.