H743 WING V3 Dual Gyro Flight Controller Supports Dual Motor and Dual Cameras for FPV RC Airplane Fixed Wing
1 in stock
- SKU : 2039079
- Condition : New
- Brand : H743
- Processing Time : Ships Within 24-48 Hours
- Return Policy : 30-day refund or replacement
$129.99 $185.99
Specification:
|
FC Specifications |
Model:H743 WING V3 Flight Controller MCU: STM32H743VIT6, 480MHz , 1MB RAM, 2MB Flash IMU: MPU6000 (SPI1) & ICM42605 (SPI4) Baro: Infineon DPS310 (I2C2) OSD: AT7456E (SPI2) Blackbox: MicroSD card slot (SDIO) 7x Uarts (1,2,3,4,6,7,8) with built-in inversion. 13x PWM outputs(including “LED” pad): 2x I2C 1x CAN 6x ADC (VBAT, Current, RSSI, Analog AirSpeed, VB2, CU2) 3x LEDs for FC STATUS (Blue, Red) and 3.3V indicator(Red) 1x SPI3 – USB/Beep Extender with Type-C(USB2.0) – Dual Camera Inputs switch – 5V/9V(12V) for Camera/VTX power switch – High-precision Current Sense (90A continuous, 220A peak) – Static power 160mA@5V Battery Voltage Sensor: 1K:10K (Scale 1100 in INAV, BATT_VOLT_MULT 11.0 in ArduPilot) ADC VB2 voltage divider: 1K:20K ADC AirSpeed voltage divider: 20K:20K |
|
FC Firmware |
ArduPilot(ChiBiOS): MATEKH743 INAV: MATEKH743 |
|
PDB |
Input voltage range: 8~36V (3~8S LiPo) w/TVS protection 2x ESC power pads Current Senor: 220A, 3.3V ADC (Scale 150 in INAV, 66.7 A/V in ArduPilot) Sense resistor: 90A continuous, 220A peak |
|
BEC 5V output |
Designed for Flight controller, Receiver, OSD, Camera, Buzzer, 2812 LED_Strip, Buzzer, GPS module, AirSpeed Output 5.15 +/- 0.1V DC Continuous current 2 Amps, 3A Peak |
|
BEC 9V /12V output |
Designed for Video Transmitter, Camera, Gimbal ect. Continuous current 2 Amps, 3A Peak 12V option with Jumper pad |
|
BEC Vx output |
Designed for Servos Voltage adjustable, 5V Default, 6V or 7.2V via jumper Continuous current 8 Amps, 10A Peak |
|
BEC 3.3V output |
Linear Regulator Continuous current: 200mA |
|
Physical |
Mounting: 30.5 x 30.5mm, Φ4mm with Grommets Φ3mm Dimensions: 54 x 36 x 13 mm Weight: 30g with USB extender |
Package included:
1x H743-WING
1x USB(Type-C)/Beep (Passive buzzer) Extender
1x 20cm JST-SH-6P to JST-SH-6P cable for USB extender.
2x 20cm JST-GH-4P to JST-GH-4P cable for CAN & I2C port
1x Rubycon ZLH 35V 470uF capacitor
Dupont 2.54 pins (Board is shipped unsoldered)
‘Times New Roman’;12.0000pt;1.0000pt;
‘Times New Roman’;12.0000pt;1.0000pt;
Based on 0 reviews
Be the first to review “H743 WING V3 Dual Gyro Flight Controller Supports Dual Motor and Dual Cameras for FPV RC Airplane Fixed Wing”
You must be logged in to post a review.
There are no reviews yet.